The Covid 19 pandemic presents unique challenges to all business sectors including construction. One of the most pressing difficulties is keeping up productivity on site while practising the social distancing measures as per government guidelines.

 

Utilising off-site construction as much as possible can be key to achieving project schedules while observing best health and safety practice. This has always been a benefit of modular construction and is now more significant than ever before.

Eurobrick have supplied brick and stone slip cladding to the Modular Building sector for nearly 30 years. Director Richard Haines talks here about the advantages of using brick cladding to maintain a brick finish with off-site construction, particularly in the current climate.

 

Error, group does not exist! Check your syntax! (ID: 6)

 

“Eurobrick systems are lightweight and easy to install. In a controlled factory environment, an installer should be able to install at least 1m² per hour but an experienced installer may do a lot more. Brick cladding only requires semi-skilled labour to install too, so with the increasing skills shortage in the construction industry, reducing dependency on traditional skilled labour is advantageous.

Where installed in a factory environment, our systems are robust enough to withstand the stresses of being transported to site and craned into position. A modular building that can be delivered to site and which does not require substantial finishing works or large teams to implement installation is a major benefit, as speed of delivery is a critical factor for most projects alongside meeting important new health and safety measures.

Even in projects where it is not possible to fit Eurobrick brick slip cladding to a module before it reaches site, the cladding work can be taken off the critical path which means contact between different teams on-site can be managed more effectively.

A brick finish remains popular and is sometimes required to fit in with existing buildings. Our wide range of brick slips allows you to match the finish of existing structures and as our systems are flexible, they can be used in conjunction with other exterior finishes such as timber and render. This means a mixed palette of finishes, popular for creating a contemporary look, is achievable. And you can be assured that our kiln fired clay brick slips weather and age in the same way as conventional brickwork, requiring little to no maintenance.

Eurobrick have supplied a wide range of projects including residential and leisure developments, schools, colleges and universities throughout the country. Not only are our systems tried and tested, but they have certification from the British Board of Agrément (BBA), are LABC registered and we also provide our own 25 years guarantee.

Not all systems are created equally and while Eurobrick’s products have been tested extensively in laboratories they have also been tested and proven out in the real world during our 30 years in business. Other suppliers offer alternative systems however few, if any, have the wealth of experience and knowledge accumulated by Eurobrick and our dedicated team will be pleased to provide expert advice and practical solutions.

Furthermore, there is a network of independent Eurobrick Approved Installers who can provide experienced labour to projects of all sizes all over the UK.”

Eurobrick’s brick slip cladding offers numerous benefits in many situations. For modular/off-site construction the ease of installation, low weight, product consistency and a means to provide a real clay brick finish are key. While the construction industry is forced to adapt to the current circumstances, modules constructed off-site but with traditional appearance finishes will enable projects to proceed while maintaining the safety of the workforce.

 

For more information visit www.eurobrick.co.uk.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

*

code